Shopping
Cart
Component selection Wizard
Are you planning to make a fixture for a tank or an algae filter?
Do you have a saltwater tank or a freshwater tank?
What version of LED assemblies you would like to use?
Specify the dimensions of your tank in
Specify the desired suspension height of the LED luminary above the water surface in
Specify the dimensions of the surface compartment of your algae filter or the dimensions of algae scrubber in
Recommended number of LED assemblies:
from pcs (acceptable lighting, economy option)
to pcs (strongest lighting, only recommended for algae scrubbers ).
Specify the desired number of assemblies:
Specify the desired mode of the heatsink. Passive (without fan, a big heatsink is necessary) or active (fan is necessary, a smaller heatsink)
The necessary power of PSU not less than:W
Examine the list of recommended power supplies (will open in a new window).
Specify the voltage of your power supply unit in volts. The value can be from 20 to 60 volts.
We recommend choosing from a standard range of voltages: 24V, 36V, 48V or 54V.
Please note - bigger voltage of the PSU may require the less amount of driver assemblies.
Would you like to order a complete set of tested cables with stuffed connectors? This option is stronlgy recommended, except for tanks with non-standard shapes. All that remains is placing them in your fixture.
Would you like us to provide professional installation of optics on LED assemblies? Cost of this service is $1 for each 12x optics and $1 for each diffuser.