|Version 3.0||Product code: 12xV3.0|
The 12xV3.0 LED assembly is the state of the art light source for your reef tank. Its creation was the outcome of years of research, as outlined in this article:
Light in the Reef Aquaria
Availability: Out of Stock
|Color||Max. current||Max. voltage drop on the chain||Wavelength /
|LED emitter type|
|Power connector X1. Contact #1 of the conector is marked with a dot on the MCPCB.|
|Turquois||1000ma||3.5V||505-510nm||Luxeon Rebel ES LXML-PE01 bin: L4R|
|Blue||1000ma||3.5V||470-475nm||Luxeon Rebel ES LXML-PB02 bin: J3R|
|TSLC N3535U 800-850mW @ 500mA
TSLC N3535U 750-800mW @ 500mA 2pcs
TSLC N3535U 850-900mW @ 500mA
|Power connector X2. Contact #1 of the conector is marked with a dot on the MCPCB.|
|Red||700ma||2.8V||630-645nm||Luxeon Rebel LXM2-PD01 bin: J5Y|
|PC Amber||700ma||3.5V||~590nm||Luxeon Rebel LXM2-PL01 bin: N2S|
|Cool White||1500ma||6.4V||CCT:6500K||Luxeon Tx L1T2-6570000000000-CT bin: T1AR 2pcs|
|Royal Blue||1200ma||6.0V||445-450nm||Luxeon T LXH1-FWRB bin: D04R 2pcs|
|Total power consumption, W: ||up to 43|
|Length, mm / in||70 / 2.76|
|Width, mm / in||60 / 2.36|
|Height, mm / in||7.4 / 0.29|
|Mounting holes diameter, mm / in||3.3 / 0.13|
|Mounting holes spacing, mm / in||47.5 / 1.88|
|Weight, grams / oz||35 / 1.23|
|Completely solderless assembly. Matching connectors are included.||YES|
The LEDs are placed on a unique patented SinkPADTMII MCPCB which provides the best available* heat conducting path.
The LED assembly must be used with matching LED drivers. If using with ReedLedLab controller and drivers, control channels on the drivers can be configured by jumpers. Instructions.
“*” By November, 2016
“**” No competing solutions were available on the market by November, 2016
When using a 7ch LED assembly with a 6ch controller you can combine the Blue and Turquois LEDs in one channel.
Use our Spectrum Simulator to evaluate the spectral output of the LED assembly in different modes:
The spectral graphs are based on mathematical simulation and are provided for reference only.
Make a DIY LED fixture using our LED assembly: Video Tutorial:
Note: – the tutorial was made using rev. 2.2 of the 6-channel LED assembly and a different connector. You can also watch our video tutorial on how to use the new connectors.
Using the KRP crimper tool: