|Version 2.2||Product code: 12xV2.2|
The 12xV2.2 LED assembly is a "lite" edition source for your reef tank. Its creation was the outcome of years of research, as outlined in article
Light in the Reef Aquaria
|Color||Max. current||Max. voltage drop on the chain||Wavelength /
|LED emitter type|
|Power connector X1|
|Turquois||1000ma||3.5V||505-510nm||Luxeon Rebel ES LXML-PE01 bin: L4R|
|Luxeon Rebel ES LXML-PR02 bin: A4R
Luxeon Rebel ES LXML-PR02 bin: A5R
|Red||700ma||3.0V||620-630nm||Luxeon Rebel LXML-PD01 bin: H4Z|
|Power connector X2|
|Luxeon Rebel ES LXML-PWC2 bin: WW0R
Luxeon Rebel ES LXW8-PW40 bin: SW0R
|Blue||1000ma||3.5V||470-475nm||Luxeon Rebel ES LXML-PB02 bin: J3R|
|Semileds N35L-U-A 340mW @ 350mA 2pcs
Semileds N35L-U-A 400mW @ 350mA 2pcs
Semileds N35L-U-A 480mW @ 350mA 1pcs
|Total power consumption, W: ||up to 39|
|Length, mm / in||60 / 2.36|
|Width, mm / in||60 / 2.36|
|Height, mm / in||3.7 / 0.15|
|Mounting holes diameter, mm / in||3.3 / 0.13|
|Mounting holes spacing, mm / in||47.5 / 1.88|
|Weight, grams / oz||30 / 1.06|
|Completely solderless assembly. Matching connectors are included.||YES|
The LEDs are placed on a patented SinkPADTM MCPCB which provides an improved heat conducting path.
The LED assembly must be used with matching LED drivers. If using with ReedLedLab controller and drivers, control channels on the drivers can be configured by jumpers. Instructions.
“*” No competing solutions were available on the market by January, 2014
Use our Spectrum Simulator to evaluate the spectral output of the LED assembly in different modes:
The spectral graphs are based on mathematical simulation and are provided for reference only.
Make a DIY LED fixture using our LED assembly: Video Tutorial:
Note: – the tutorial was made using rev. 2.2 of the 6-channel LED assembly and a different connector. You can also watch our video tutorial on how to use the new connectors.
Using the KRP crimper tool: