Shopping
Cart
The connection terminal is for the convenient assembly of power cables.
Connection terminals, analogue of Wago 222-413 are sold in pairs, the price and weight is for 2 pieces.
Connection terminals 222-413 seize 3 fine wire conductors from 0.08 (AWG28) to 2.5 (AWG13) sq.mm. Due to the lever's recessed design it can't accidentally be pressed on when installing it in a tight space. All terminals in the assembly are connected sequentially. Thus, a wire from the power supply can be installed in the first terminal, and the wires from the loads in the others. Prior to installation you should remove 9-10mm of insulation from the wire end, then raise an orange terminal lever, enter the stripped wire end into the terminal opening and lower the lever.
NOTE: You should install only unipolar conductors in one terminal!
Additional information about the product can be found in the technical document (Wago 222-413)
Make a DIY LED fixture using our LED assembly: Video Tutorial:
Note: – the tutorial was made using rev. 2.2 of the 6-channel LED assembly and a different connector. You can also watch our video tutorial on how to use the new connectors.
Using the KRP crimper tool: